This has been but a taste of the vast GM Performance Catalog. GM crate engines run the gamut from affordable and economical four-cylinder mills to gallon-per-mile big blocks that sound like the devil gargling Listerine. And the future is bright: Chevrolet is bringing back the COPO Camaro and the newly-launched 2019 ZR1 packs 755 horsepower and a 210-mph top speed.
It almost goes without saying but the weight allowance should give more than enough to haul your vehicle up or out. As a general rule of thumb, the winch should be rated for a minimum of 1.5 times the gross vehicle weight.
You get the same 3.6L engine found in the Dodge and Chrysler minivans on our list. The only difference is that it is now in a slightly heavier minivan. We couldn’t leave you with a cloud of gloom and doom over the entire world of used minivans. So, here is the best used minivan in our opinion…the Kia Sedona.
On paper, the Toyota Sienna seems to offer everything. It is roomy and has plenty of cargo space. Unfortunately, what looks good on paper isn’t always good in real life.
A crate engine or crate motor is a factory-built engine that arrives at your doorstep perfectly timed, balanced, and blueprinted, and ready to provide motive power for any project you have laying around. Included parts are a fully assembled block consisting of crank, rods, and pistons, a fully assembled head consisting of valves, cams, and associated parts, and often a carburetor for fuel delivery.
Yes, you can buy a GM crate engine directly from the factory, one capable of 1200 horsepower, and put it in anything you want. Providing you have enough spare change in your pocket to buy a used Tesla Model S. Oh, and GM is smart enough to not offer a warranty on this one. Sorry Doug Demuro.
In addition to their beauty, they were pretty powerful for their day. In 1954, Ford dropped in an overhead valve V-8 that put out 130 horsepower. By 1956, it was up to almost 180. In addition, 1953 was the first year that an automatic transmission was put into a Ford pickup.
We will never understand why this isn’t always a default option on all new vehicles capable of off-road driving. There are times when you will need slow and steady power coming from both wheels on each axle. A limited slip differential will keep some of the single side spin down but a full locker is much better in terms of 4×4 Jeep mods. Locking both wheels to spin in unison is an easier way to get out of sticky situations. When combined with the use of a properly anchored winch, there’s almost nowhere you can’t go.
A Jeep is a good place to start when you want to get off the pavement and into some fun situations. However, if you’re looking to really tackle the wilderness, you need more than just a little more clearance. Use this list of Jeep mods to start planning your build to get in and out of some rough spots.
Tires are arguably the most important part of the Jeep mods you’ll want to consider before going off-road. If they’re too small, they make the vehicle look silly and performance just won’t be there. If they are too large, there will be clearance issues on flat surfaces as well as rubbing while turning.
This Bronco came with a part-time four-wheel drive system and a V-8 under the hood. You could choose from a 5.8L 351M and the 6.6L 400. A C6 automatic transmission came standard or you could pick the optional 4-speed manual. This is the last generation of the Bronco to have a solid front axle, making it great for off-roading.
It also favors a hydraulic roller camshaft instead of the original’s flat-tappet cam. It makes a few extra ponies over the old model, too: 480 horsepower and 490 lb-ft of torque will melt any tires this engine’s hooked up to.
The Highboy was available with a 360 V-8 or the less powerful six-cylinder. A C6 automatic transmission was a common choice on the Highboy. Its tough look makes these trucks pretty collectible so they can be hard to find and sort of pricey for a fully restored version but if you have the budget, it’s a great choice if you are looking for a cool old ford truck.