Let’s start with the 9.1:1 compression, which means you can run this on pump gas. Add in a cast aluminum block, titanium valves, and a forged steel crank attached to forged titanium rods attached to forged aluminum pistons. Top that off with hydraulic roller cams, aluminum heads, and a high-helix supercharger pushing 10.5psi of boost.
Rock sliders create a solid barrier between your Jeep and a hard surface. Meanwhile, replacing stock bumpers with steel fabricated off-road bumpers protects the front and rear from sharp slams. These can also give a greater angle of approach when going up slopes or coming down from them.
Volkswagen took a Chrysler Town & Country platform and offered the world the Volkswagen Routan for the 2008 through 2013 model years. Few buyers were impressed. Even fewer used minivan buyers should be.
The Bronco is so cool we had to put it on our list of cool old Ford trucks twice. These years fall into the first generation of Broncos, which were fairly small but oh so cool. The Baja was a special edition that was created by off-road racing legend Bill Stroppe and the Ford design team.
This crate engine is hand-assembled in its own special facility, presumably so as to not risk contamination by one of those plebian engines we saw earlier. Gone are the days of solid lifters and cast-iron heads this beast combines an LSX cast-iron block, LS7/Z06 aluminum heads, forged steel crank and rods, forged aluminum pistons, hydraulic roller cams, and 10.2:1 compression.
It has 113-cc intake ports, 2.25-inch intake valves and 1.88-inch exhaust valves, a massive 1150cfm carb (yes, a carb), a solid-roller cam with 0.714 inches of lift, 12:1 compression, and it requires 110 octane fuel. Here’s GM’s succinct English translation of those stats:
It’s worth mentioning the base LS9 crate engine costs $17,322, but GM makes the best controller kit ($1601.27), and the LS9 requires external oil and coolant tanks. You won’t get too far without those, bringing the operational total to the eye-watering figure you see above.
It also favors a hydraulic roller camshaft instead of the original’s flat-tappet cam. It makes a few extra ponies over the old model, too: 480 horsepower and 490 lb-ft of torque will melt any tires this engine’s hooked up to.