It almost goes without saying but the weight allowance should give more than enough to haul your vehicle up or out. As a general rule of thumb, the winch should be rated for a minimum of 1.5 times the gross vehicle weight.
At 9.37 liters, the ZZ572 is the mac daddy of all big block engines. It’s nearly a 1-liter EcoBoost larger than any engine ever fitted to a production vehicle (the 8.4-liter V10 in the dearly departed Dodge Viper). Naturally, that means it’s got loads of power 727 horsepower and 680 torques but those aren’t the most impressive specs.
If any car was worthy of carrying the original ZR1’s torch, it was that one. The numbers are huge: 638 horsepower and 604 lb-ft, with 90% of peak torque available from 2600 to 6000 rpm. Translation: lots of power on tap, whenever you want it.
This isn’t the 350 that your neighbor pulled out of a C10 truck and slapped a hot cam into. No, this is a 110-octane-only race crate engine built exclusively to win races at the local 1320. GM advises that the LSX454R comes with no warranty and is “not for road use”.
Put it all together and you have the monstrous mill that propelled the 2009 ZR1 to 60mph in 3.2 seconds, 100 in 7 seconds, and covered the quarter mile in 11.3 at 131 mph. Keep in mind this isn’t the spec list for a 2013 Gallardo, this was a 2009 Chevrolet Corvette. An all-aluminum supercharged V8 in a 200-mph American car that was faster than a GT-R, in 2009.
Having an outdated design alone does not land the Nissan Quest on our list of the worst used minivans, though. The main drawback to the Quest is its interior. First up, the Quest can only seat a maximum of seven when many of its competitors can handle eight.
The Nissan Quest barely survived the 2017 model year and reached the end of its production run after the 2018 model year. There are many reasons the Quest is out; the main one being that Nissan has not updated the oddly designed minivan for several years.
The modern equivalent of that engine is GM’s ZZ427 crate motor. It stays true to the cast-iron block of its forefather, but runs pump-gas-friendly 10.0:1 compression, sports aluminum heads and an all-forged rotating assembly.