This is one of the best old Ford trucks as far as we are concerned, but they can be hard to come by. Restored versions tend to be pricey but it’s a great choice if you can get ahold of one.
Right in line with body armor are more Jeep mods to make sure that the underside is protected. All it takes is one hard drop at the wrong time to snap off an essential part of your vehicle. Skid plates run from simple front and rear protection up to complete chassis coverings. The gas tank and oil pan, as well as the differential and transfer case, are all rather vulnerable spots on the underside. They may be able to take a little abuse but how much are you willing to risk?
The single engine option after the 2008 model year is a 3.5L V6 that delivers 266 hp and 245 lb-ft of torque. The engine is always paired to a six-speed automatic. The combo offers middle-of-the-road fuel economy of 20 mpg combined. Where the Toyota Sienna stands out among used minivans is the available all-wheel drive system. This is a great option for buyers who must contend with a lot of snow and ice.
Enter the LT4 crate engine. Power comes on fast: a 1.7-liter Eaton supercharger spins at 20,000 rpm to force 9 pounds of boost into this 6.2-liter engine. That results in the same 650 horsepower and 650 torques you’ll find in the Z06 that’s sitting over at your local dealership, but for a fraction of the price.
This crate engine is hand-assembled in its own special facility, presumably so as to not risk contamination by one of those plebian engines we saw earlier. Gone are the days of solid lifters and cast-iron heads this beast combines an LSX cast-iron block, LS7/Z06 aluminum heads, forged steel crank and rods, forged aluminum pistons, hydraulic roller cams, and 10.2:1 compression.
A Jeep is a good place to start when you want to get off the pavement and into some fun situations. However, if you’re looking to really tackle the wilderness, you need more than just a little more clearance. Use this list of Jeep mods to start planning your build to get in and out of some rough spots.
A big block has higher weight and density in the block, as well as larger valve bores, a longer stroke, and a generally larger exterior size. A big block can have the same displacement as a small block, but only the most extreme small blocks encroach on this territory.
Speaking of tires, they do absolutely no good if side to side movement with low pressure causes them to slip off the rim. Being in the middle of nowhere with rubber out of place and no way to change it is an awful situation. However, there are already bead lock rims on the market to prevent this exact problem.